Audio Tweaks Home 
"Improving
audio system
sound, one
tweak at a time"
 
Disclaimer
 

 

 

Audio Tweaks - Tweak Ref. 212
  

Home   About   Tweaks   Reviews   DIY   Links   Contact

 
 
 
Description   Disclaimer    Previous tweak Next tweak
Vitalizing most tube amps by modernizing the driving-section
 
Reference # Submitted by Submitter rating Cost
212 Mart The Best $5.00
 
Source Brand
Techies at 'Heart Holland' amplifier production plant
 
Construction
Determine the grid resistor (100 to 470k) located between the minus-side of the last coupling cap and GND. Replace it with one of half it's value or parallel it with one of the same value. About the same applies to the caps: Fit some with twice (or more) the original value or parallel them with some of the same value.
 
Setup
 
Use
Open your amp, do the tweak, close it and listen.
 
Performance
For reasons of cost, most commercial amps have large grid resistors for their power tubes, in order to be able to use small, cheap coupling caps. This high impedance deteriorates proper working of power tube AND coupling cap.
 
Other
If in doubt, feel free to ask: martbak@!dds.nl (non-commercial) Cost: 5 and up (depending on Cap choice)
 
 
Comments   Comment on this tweak Add 
 
 
 
Scroll to top